2020 Kawasaki Mule SX™ FI 4x4 SE

Check Availability Hi, my name is and I'm interested in this 2020 Kawasaki Mule SX™ FI 4x4 SE . I'm in the area and you can reach me at or on my phone at .

FIT IT IN A PICKUP

MULE SX™ side x sides pack plenty of muscle to provide both strength and agility. Take on a wide variety of challenges with the ability to maneuver through tight areas. MULE SX side x sides are willing companions on both the jobsite and the trails during the weekends.

CARGO & TOWING

MULE SX™ side x sides are loaded with muscle. Haul up to 400 pounds in a single trip and tow up to 1,100 pounds*. The tilting steel cargo bed with latching tailgate features a textured floor, while integrated cargo bed rails allow for easy installation of select Kawasaki Genuine Accessories using KQR™ mounts with quick release capabilities.

COMPACT & POWER

MULE SX™ side x sides are powered by a strong, dependable 401cc single-cylinder four-stroke engine. A fully automatic Continuously Variable Transmission (CVT) comes with high and low* forward ranges, providing simple operation and efficient engine range necessary to haul cargo and take on rugged terrain.

AGILITY & TURNING

MULE SX™ side x sides go where others can’t. Compact size makes for an easy fit into the bed of a full-size pickup truck and a tight turning radius allows for seamless navigation through tight areas.

MULE SX™ 4x4 SE FI STANDARD FEATURES
• Towing Hitch Drawbar
• Steering Wheel-mounted Horn
• 24-inch Duro Tires
• Fuel-injected 401cc, Single-cylinder, 4-stroke Engine
• 2 Halogen Headlights
• Continuously Variable Transmission (CVT) with High, Low,Neutral and Reverse
• Selectable 2WD/4WD/Dual-mode Locking Rear Differential 

Engine

  • Engine Type:
    Single-Cylinder
  • Cylinders:
    1
  • Engine Stroke:
    4-Stroke
  • Torque (Ft Lbs):
    21.4
  • Torque (Nm):
    29
  • Torque RPM:
    2400
  • Cooling:
    Air / Fan
  • Valves:
    2
  • Valves Per Cylinder:
    2
  • Valve Configuration:
    OHV
  • Bore (mm):
    82
  • Bore (in):
    3.23
  • Stroke (mm):
    76
  • Stroke (in):
    2.99
  • Displacement (cc):
    401
  • Displacement (ci):
    24.5
  • Compression Ratio:
    8.6:1
  • Starter:
    Electric
  • Fuel Requirements:
    Regular
  • Fuel Type:
    Gas

Brakes

  • Front Brake Type:
    Sealed Hydraulic Drum
  • Rear Brake Type:
    Sealed Hydraulic Drum

Carburetion

  • Fuel Injector:
    Yes
  • Fuel Injector Size (mm):
    23
  • Carburetion Type:
    Fuel Injected

Dimensions

  • Length (in):
    106.7
  • Length (mm):
    2710.2
  • Width (in):
    52.6
  • Width (mm):
    1336
  • Height (in):
    70.9
  • Height (mm):
    1800.9
  • Wheelbase (in):
    70.1
  • Wheelbase (mm):
    1780.5
  • Turning Radius (ft):
    10.8
  • Ground Clearance (in):
    6.7
  • Ground Clearance (mm):
    170.2
  • Length (ft):
    8.89
  • Length (ft/ft):
    8
  • Length (ft/in):
    10.7

Other

  • Fuel Capacity (gal):
    4.2
  • Fuel Capacity (l):
    15.9
  • Bed Length (in):
    35.6
  • Bed Length (mm):
    904.2
  • Bed Height (in):
    9.6
  • Bed Height (mm):
    243.8
  • Bed Width (in):
    40.9
  • Bed Width (mm):
    1038.9
  • Bed Capacity (lbs.):
    400
  • Bed Capacity (kgs.):
    181.4
  • Cargo Bed Tilt:
    Yes
  • Cargo Bed Material:
    Steel
  • Bed Volume (ft3):
    8.1
  • Bed Volume (m3):
    0.2
  • Integral Tie-Down Hooks:
    Yes
  • Frame:
    Steel
  • Body Material:
    Plastic
  • Number Of Cupholders:
    2
  • Differential Lock Location:
    Rear
  • Driveline Type:
    Selectable 4X2 / 4X4
  • Number Of Driveline Modes:
    2
  • Rear Unlocking Differential:
    Yes
  • Front Mud Guards:
    Yes
  • Front Suspension Type:
    McPherson Strut
  • Front Travel (in):
    3.1
  • Front Travel (mm):
    78.7
  • Fuel Level Warning Type:
    Gauge
  • SysModelID:
    97773
  • MfrModelID:
    KAF400WLF
  • Year:
    2020
  • Manufacturer:
    Kawasaki
  • Model Name:
    Mule SX™ FI
  • Trim Name:
    4x4 SE
  • Family Name:
    Mule
  • Product Type:
    Utility Vehicle
  • Manufacturer Type:
    Utility / Recreation
  • Generic Type (Primary):
    Utility
  • Manufacturer Country:
    Japan
  • Photo Name:
    2019_Kawasaki_MuleSX_4x4SE.jpg
  • Major Revision Year:
    2017
  • Revision Status:
    Carryover
  • Competitor Code:
    UTE20U4A000
  • Introduction Year:
    2017
  • SysTrimId:
    292063
  • SysMakeId:
    3
  • Historical ID:
    241203
  • Data Provider:
    CRS
  • Parent Company:
    Kawasaki
  • Display Name:
    Mule SX™ 4x4 SE FI
  • Limited Slip Differential Location:
    Front
  • Speed Governor:
    Yes
  • Currency:
    US Dollars
  • Warranty (Months):
    36
  • Destination Charge:
    670
  • Warranty (Condition):
    Limited
  • Rack Rails Location:
    Cargo Bed
  • Rear Suspension Type:
    Swing Arm
  • Rear Travel (in):
    3.1
  • Rear Travel (mm):
    78.7
  • Rear Adjustable Shock / Spring Pre-Load:
    Yes
  • Number Rear Shock Absorbers:
    2
  • Adjustment Type:
    Shock Mounted Adjustment
  • Seat Type:
    Bench
  • Seat Material:
    Vinyl
  • Folding:
    Yes
  • Number Of Seats:
    2
  • Number Of Rows:
    1
  • Bash Plate (Front):
    Yes
  • Steering Type:
    Rack & Pinion
  • Steering Control:
    Steering Wheel
  • Temperature Warning Type:
    Light
  • Tire Brand:
    Duro
  • Front Tire Width:
    9
  • Front Wheel Diameter:
    10
  • Rear Tire Width:
    11
  • Rear Wheel Diameter:
    10
  • Front Tire (Full Spec):
    Duro: 24 x 9-10
  • Rear Tire (Full Spec):
    Duro: 24 x 11-10
  • Wheels Composition:
    Steel
  • Tube / Tubeless:
    Tubeless
  • Front Tire Diameter (in):
    24
  • Rear Tire Diameter (in):
    24
  • Type:
    Halogen

Our Location


Friendly Powersports Slidell
38008 Brownsvillage Rd
Slidell, LA 70460